Stop/Start Fault

Faults and Technical chat for the Nissan Pulsar
syneman
Posts: 68
Joined: Thu Aug 09, 2018 9:45 pm

Re: Stop/Start Fault

Post by syneman » Wed Mar 06, 2019 9:45 pm

Mine is working fine these days . I dunno if in the last service check they did an update , but so far it’s ok too.


Bazzer1977
Posts: 5
Joined: Wed Feb 13, 2019 7:37 pm

Re: Stop/Start Fault

Post by Bazzer1977 » Sat Mar 09, 2019 10:01 am

confirmed as o2 sensor on mine, apparently part not in stock so still waiting the call to get it fixed 🙁


Bazzer1977
Posts: 5
Joined: Wed Feb 13, 2019 7:37 pm

Re: Stop/Start Fault

Post by Bazzer1977 » Mon Mar 11, 2019 9:10 pm

Happy to report I had the new o2 sensor fitted under guarantee today. EML light has stayed off and auto stop start function has worked flawlessly since leaving the garage 😁


Metalmickey
Posts: 144
Joined: Tue Jul 12, 2016 8:55 pm

Re: Stop/Start Fault

Post by Metalmickey » Mon Mar 18, 2019 8:23 pm

Had new o2 sensor fitted today under warranty, so far so good
service and 1st mot as well.
front brakes 50% worn, rear 40% worn, tyres down to between 3.5 and 4.5 mm tread.
23000 miles on clock.
drove qq curtasy car with electronic handbrake, not a fan of that system


kt53
Posts: 499
Joined: Sun Nov 13, 2016 4:29 pm

Re: Stop/Start Fault

Post by kt53 » Tue Mar 19, 2019 8:18 am

Metalmickey wrote:
Mon Mar 18, 2019 8:23 pm

drove qq curtasy car with electronic handbrake, not a fan of that system
I agree. What can be easier than simply pulling a lever to set the handbrake? On one of the traffic police programmes a while ago they were called to a brand new Range Rover which had come to a sudden halt in lane 3 of a motorway. It had stopped in traffic and refused to move when traffic started up again. Police realised that the electronic brake had set, but there was no way to release it. End result was traffic chaos until a recovery lorry with a lift arrived to remove it.


Post Reply

Return to “Faults & Technical”