windscreen washers

Faults and Technical chat for the Nissan Pulsar
Post Reply
Oldtimer
Posts: 18
Joined: Wed Dec 13, 2017 5:29 pm
Location: Neston

Post by Oldtimer »

Hello,
I wish to adjust the screen washer jets as they are set far too low at the moment, I can't really see a means of adjustment and I don't want to break anything !!

I also want to remove the black plastic surround at the centre of the dash , I can pull the bottom away but the top portion appears to be stuck and I'm reluctant to pull too hard in case I break anything !! The reason I want to remove it is to put some stick on foam around the underside to stop the very annoying rattles.

The fuel consumption appears to be very poor at an average of 32mpg.

Regards from Neale. My model of car is 2017 Tekna 1.2 .

kt53
Posts: 631
Joined: Sun Nov 13, 2016 4:29 pm

Post by kt53 »

I wouldn't recommend pulling the dash apart on a newish car. Go to the dealership and get them to sort the rattle out. They will also be able to either adjust the washer jets or show you how to do it.
nottmsteve
Posts: 152
Joined: Sun Jun 04, 2017 4:35 pm
Location: East Midlands

Post by nottmsteve »

It's a 2017 model. I wouldn't even be thinking about doing anything to it - let Nissan get dirty and pay for it !
2017 1.2 Pulsar Tekna
2017 1.2 Micra Acenta
Post Reply