Page 1 of 1

Changing halogen headlamp bulbs to led

Posted: Fri Feb 08, 2019 7:26 pm
by syneman
Hi, I just bought some led h11 “c6” led conversion kit bulbs and I am having difficulty with the size of the male size prongs that go from the LED connector to the female end connector on the end of the Pulsar harness. The LED say H11 so I figured it should easily be an easy plug and play, but the size is too wide ( prongs) on the LED connector. Does anyone know what size I should be after or what I can do ?

The pictures below (links) are here to maybe help.On one photo shows the halogen prongs from the Pulsar. The other shows the led prongs..

See the size difference. The prongs on the Pulsar is narrower.

https://ibb.co/NWddWnn

https://ibb.co/jvTSW95

Re: Changing halogen headlamp bulbs to led

Posted: Sat Feb 09, 2019 8:40 am
by syneman
Starting to think that these are h7 bulbs in a h11 labeled box.

Re: Changing halogen headlamp bulbs to led

Posted: Sat Feb 09, 2019 3:37 pm
by syneman
Heres the end from the connector on the Pulsar

Image