Help! - Broken wing mirror housing

Problems using the forum - post here. Not Car Related.
Post Reply
RPJ
Posts: 15
Joined: Tue Oct 20, 2015 4:22 pm

Help! - Broken wing mirror housing

Post by RPJ » Sat Mar 23, 2019 5:22 pm

Hi,

I'm hoping for some advice. While driving home from work last night some clown in a white Peugeot (who didn't stop by the way) whacked my driver's side wing mirror. Thankfully the glass didn't break and initially I thought I had only lost the colour coded top trim cover, which I managed to retrieve from the road, but sadly on closer inspection I found that the black housing underneath the mirror was shattered with a big hole in it. I have also noticed since that there is a crack in the plastic where the wing mirror unit connects to the car's door.

Any ideas as to the best way to fix this damage? Would I need to buy a complete replacement unit which would probably be expensive, or could I just purchase the black plastic section that sits under the mirror?

I'd appreciate any suggestions. or guidance, thanks.


kt53
Posts: 519
Joined: Sun Nov 13, 2016 4:29 pm

Re: Help! - Broken wing mirror housing

Post by kt53 » Sat Mar 23, 2019 8:10 pm

You could try a vehicle dismantler, but I would expect Pulsar bits to be pretty rare.


fujikun
Posts: 67
Joined: Fri May 04, 2018 12:41 pm

Re: Help! - Broken wing mirror housing

Post by fujikun » Sun Mar 24, 2019 7:24 am

there are a few dismantlers on ebay selling the parts, your best bet is to try them, you never know you might even get one the correct colour.
good luck


Post Reply

Return to “Website Issues”