Page 1 of 1

Help! - Broken wing mirror housing

Posted: Sat Mar 23, 2019 5:22 pm
by RPJ
Hi,

I'm hoping for some advice. While driving home from work last night some clown in a white Peugeot (who didn't stop by the way) whacked my driver's side wing mirror. Thankfully the glass didn't break and initially I thought I had only lost the colour coded top trim cover, which I managed to retrieve from the road, but sadly on closer inspection I found that the black housing underneath the mirror was shattered with a big hole in it. I have also noticed since that there is a crack in the plastic where the wing mirror unit connects to the car's door.

Any ideas as to the best way to fix this damage? Would I need to buy a complete replacement unit which would probably be expensive, or could I just purchase the black plastic section that sits under the mirror?

I'd appreciate any suggestions. or guidance, thanks.

Re: Help! - Broken wing mirror housing

Posted: Sat Mar 23, 2019 8:10 pm
by kt53
You could try a vehicle dismantler, but I would expect Pulsar bits to be pretty rare.

Re: Help! - Broken wing mirror housing

Posted: Sun Mar 24, 2019 7:24 am
by fujikun
there are a few dismantlers on ebay selling the parts, your best bet is to try them, you never know you might even get one the correct colour.
good luck