Hello,
Has anyone installed an induction kit or done any exhaust modifications to make the pulsar sound a bit more throaty ?
Induction kit/ exhaust modifications (want more of a growl)
16 Plate 1.2 DIG-T Tekna
Storm White
Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light
Storm White
Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light
Well Funnily enough I have just fitted this to my 1.5DCI.
Here is a video of what it sounds like. (You will have to click the link)
https://flic.kr/p/25CLqDy
I dont get any heat soak and the intake temps are never more than 20 degrees above ambient.
Let me know if you want a list of the parts I used.
Here is a video of what it sounds like. (You will have to click the link)
https://flic.kr/p/25CLqDy
I dont get any heat soak and the intake temps are never more than 20 degrees above ambient.
Let me know if you want a list of the parts I used.
List of bits would be good for induction kit and the back box delete sounds good was it too much of a hassle?
16 Plate 1.2 DIG-T Tekna
Storm White
Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light
Storm White
Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light
Nah was easy as anything. Went to EMP Performance and they did it for me. Stainless Steel mandrel bent to I believe a 3 inch tip.
You will need a 90 degree 70mm alloy pipe and a 70mm silicone hose.
I used a 80mm alloy pipe but ended up needing reducers.
Alloy pipe: http://www.autosiliconehoses.com/alloy- ... oiner.html
Silicone Hose: http://www.autosiliconehoses.com/silico ... olour.html
The K&N Filter I used was a RU-3120 I got it from eurocarparts for £40
What length of silicone hose would you recommend getting I may have to order some bits and fit them if it's easy enough to do haha
16 Plate 1.2 DIG-T Tekna
Storm White
Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light
Storm White
Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light
Do you need to get a mini breather air filter ?
16 Plate 1.2 DIG-T Tekna
Storm White
Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light
Storm White
Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light