Aftermarket Sat/Nav

All Nissan Pulsar related discussions
Post Reply
jtodaj
Posts: 21
Joined: Sun Feb 26, 2017 3:05 pm

Post by jtodaj »

Has anyone put an aftermarket sat nav in a pulsar rather than the connect system ? also would the cameras still work on an aftermarket display ?
16 Plate 1.2 DIG-T Tekna
Storm White

Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light

Deleted User 470

Post by Deleted User 470 »

jtodaj wrote:Has anyone put an aftermarket sat nav in a pulsar rather than the connect system ? also would the cameras still work on an aftermarket display ?
This is what I am trying to find out too!

From what I have gathered the factory connect unit is a standard double din sized unit, however Connects2 do make a fascia adapter: http://www.connects2.co.uk/Product/ProductItem/CT23NS27

Connects2 do make a steering wheel control adapter: http://www.connects2.co.uk/Product/Prod ... CTSNS011.2
It doesnt state if it is for the pulsar that came with connect navigation from the factory but from the looks of it it doesnt have a RCA connector for the reversing camera.

You may have to start checking pins for signal and see if one of them is the reversing camera then wire a RCA plug onto it so you can use the factory camera

As for an aerial adapter you will need this one: http://www.connects2.co.uk/Product/ProductItem/CT27AA27
jtodaj
Posts: 21
Joined: Sun Feb 26, 2017 3:05 pm

Post by jtodaj »

mrrichmond1995 wrote:
jtodaj wrote:Has anyone put an aftermarket sat nav in a pulsar rather than the connect system ? also would the cameras still work on an aftermarket display ?
This is what I am trying to find out too!

From what I have gathered the factory connect unit is a standard double din sized unit, however Connects2 do make a fascia adapter: http://www.connects2.co.uk/Product/ProductItem/CT23NS27

Connects2 do make a steering wheel control adapter: http://www.connects2.co.uk/Product/Prod ... CTSNS011.2
It doesnt state if it is for the pulsar that came with connect navigation from the factory but from the looks of it it doesnt have a RCA connector for the reversing camera.

You may have to start checking pins for signal and see if one of them is the reversing camera then wire a RCA plug onto it so you can use the factory camera

As for an aerial adapter you will need this one: http://www.connects2.co.uk/Product/ProductItem/CT27AA27

Okay will definitely start looking into this!
16 Plate 1.2 DIG-T Tekna
Storm White

Mod List:
Shark Fin Aerial
Blue Brake Calipers
Blue Door And Dashboard Trim
LED 30w High-Beams
LED DRL Conversion
LED Number Plate Lights
LED Interior Boot Light
LED Fog Light Conversion
LED Rear Interior Light
Deleted User 470

Post by Deleted User 470 »

I have now completed this whilst retaining the factory reversing camera.

Message me if you want more info
PulsarNismo94
Posts: 45
Joined: Tue Nov 26, 2019 12:45 am

Post by PulsarNismo94 »

Interested in how this is done if anyone can shoot me some advice?
Nissan Pulsar 1.6 Dig-T '15
Bundy
Posts: 1
Joined: Sun Feb 05, 2023 9:12 pm

Post by Bundy »

mrrichmond1995 wrote: Tue May 01, 2018 2:44 pm I have now completed this whilst retaining the factory reversing camera.

Message me if you want more info
Hi!

How did you get this? I've seen the wire from my old Dasaita unit, but it's not easy to pin the yellow RCA wire to the Connects2 - CTSNS011.2 wiring.
Post Reply