Around View Monitor out of calibration
Posted: Sat Aug 05, 2017 3:51 pm
Has anyone here had their Around View Monitor, the 360 degree birds eye view one, go out of calibration? On mine the two side camera images seem to have moved relative to the front and rear and no longer line up properly. I have no idea how this can happen, as there's no damage been done to the car, especially the wing mirrors, but it's quite annoying.
My dealer says they can adjust it through their diagnostic system, but apparently it's a royal PITA to do, because you don't get instant visual feedback while you're doing it. You have to manually enter an adjustment in degrees, quit the diagnostics, reboot Connect, and see if it's OK. If not you have to reconnect the diagnostics, navigate to the correct section, change the setting again, disconnect, reboot etc. etc.
If it's such a pain to do, I'm wondering if the end result is likely to be satisfactory or whether i should just learn to live with it .. what do you think?
My dealer says they can adjust it through their diagnostic system, but apparently it's a royal PITA to do, because you don't get instant visual feedback while you're doing it. You have to manually enter an adjustment in degrees, quit the diagnostics, reboot Connect, and see if it's OK. If not you have to reconnect the diagnostics, navigate to the correct section, change the setting again, disconnect, reboot etc. etc.
If it's such a pain to do, I'm wondering if the end result is likely to be satisfactory or whether i should just learn to live with it .. what do you think?